Supply Of Rain Coat Khaki(pant & Shirt Pattern) Make Tropical Or Similar:-description : Rain Suit (legging Jacket And Cap) Made From Single Texture Natural Rubber Coated Fabric Having Fabric Surface On The Outer Side. Fabric : The Fabric Used Must Be Polyester Yarn Of Plain Weave. The G.s.m. Should Be 65 Gms (min.) For Basic Fabric And 215 Gms (min.) Foe Coated Fabric. Colour : Khaki (shade Variation Acceptable But Must Be Got Approved Before Manufacturing)make : Own. Brand : Duck Back, Rainbow Or Similar. Breaking Strength Of Coated Fabric : (5 X 20 Cms Strips) : Warp : 40, Weft :25. Water Proof Ness At 90 Cm Water Head From 1 Hour : No Leakage Or Wet Patches Of Water Should Be Observed. Construction : Upper Jacket : Front Part Of The Jacket To Be Made Of 2 Pieces With 2 Nos. Of Cross Pockets. The Back Part Must Be Single Piece Construction. The Front Part Of Jacket Must Be Fitted With Matching Ykk Zip Having A Cover With Matching 3 Nos. Of Velcro. The Sleeves End To Be Fitted With Adjusting Loop Matching Velcro Stitched Properly. Legging : The Legging Must Have Full Round 1.25 Inch Elastic Tape Properly Stitched By The 4 Niddle Gazing Machine And The Joint Of Elastic Tape Should Be Covered By Company Label With Size. Hood: The Detachable Hood Provided With 2 X 2 Inch Matching Velcro, Transparent Peak And Can Beadjusted By Using Tying Cord Of Same Colour. Tepping : The Joint Of Rain Suit Must Be Covered With Matching Taping Cloth Strips Having Minimum Width 1 Inch. Packing : Each Set To Be Packed In Same Fabric Bag And Poly Cover Both To Avoid Any Damage In Transit.