Supply, Installation And Commissioning Of Pre-wired Modular Workstationconsisting Of A Single Control Office Customized To Equip Two Sads And Twodaws Systems Arranged And Installed On A T-shaped Modular Workstationwith Integrated Cable Management Systems As Per Specifications.specifications Of Modular Workstation: 1) The Workstation Shall Each Be Of 5feet (l) X5 Feet (w) The Combined Size: 10 Feet (l) X 5 Feet (w) - 1set, Madeof 25 Mm Nfc Wood And 1 Mm Acrylic Laminate. 2) The Sads Displays Shallbe Installed Such That The Bottom Edge Of The Display Is At A Height Of 5'(approximate) From The Floor. These Shall Be Installed Preferably Along Thelonger Edge Of The T And Facing The Operators, 3) The Daws System Shall Beinstalled Such That It Is Possible To Be Used Sitting At The Workstation. 4) Allinterconnecting Wiring For Lan, Power Supply And Telephones Shall Be Doneinside The Cable Management System (powder Coated Aluminium Interlockingextrusions) And Adequate Ports Shall Be Provided On The Work Surface.communication Accessories: I) Lan Rj45: 4 Nos Ii)telephone, Rj11 : 4 Nosiii) Power Supply, 5 Amp Sockets: 6 Nos 5) All Wires Shall Be Brought Out Tointerface Boxes One For Power Supply And Another For The Communicationscables. These Boxes Shall Be Designed To Accept Connections From The Controlroom Circuits. Note: Design, Supply, Fitment, Installation, Testing Andcommissioning Shall Have To Done By The Firm Confirming To The Pre-wiredmodular T- Shaped Workstation Standards. Material Shall Confirm To Hpl/nfcengineered Wood (25mm Thickness) As Per Epd-ies-0012055:002 (s-p-12055) Certification. Make: Godrej Interio/tumbi/greeken/moudulartek Or Itsequivalent.