Overview
1w and 15h from now left
| Tender Authority | GOVERNMENT OF GUJARAT |
|---|---|
| Location | Gandhidham, Gujarat |
| Estimated Value | ₹ 7,281,318.00 |
|---|---|
| EMD | ₹ 145,626.00 |
| Document Cost | ₹ 1,180.00 |
Tender Description
Csr Work For Kutch District Table Tennis Association - Gandhidham
Premium JV Support
Only 8 days left to bid
JV for this Tender
Faster paperwork • Compliant docs • Right partners
Compact JV pack: MoU + compliance + roles + timelines — delivered against your bid deadline.
Custom JV Agreement & MoU
PQC & compliance paperwork
Workshare & risk allocation
Fast turnaround
JV Essentials Checklist
- Lead & Partner credentials (experience, turnover)
- Profit share / Workshare matrix
- Board/Partner resolutions & authorizations
- JV Agreement / MoU (stamp & notarization)
- Bid-specific annexures & declarations
Compliant Docs
Fast Turnaround
Dedicated Expert
Items Total Items : 5 | Total Qty : 2294
| Sr. No | Item Description | Qty | Unit |
|---|---|---|---|
| 1 | Supplying, laying, spreading and compacting GSB (Grade-I) with Stone dust/Grit (Grade-I) (80:20 ratio) in uniform layers of not more than 20mm thickness including water, ramming, consolidating & rolling with road / vibratory roller of 8-10 tonne capacity in each layer and finishing the surface complete as directed by Engineer-in-charge. | 274.000 | M3 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All work up to plinth level 1:4:8 (1 Cement: 4 course sand: 8 graded stone aggregate 40 mm nominal size). | 116.500 | M3 |
| 3 | Providing and laying controlled cement concrete M30 for TRIMIX (VDF) using coarse sand and graded stone aggregate of 12mm37mm size in appropriate proportions as per approved and specified design criteria. The work includes laying at the site, spreading, and mechanically compacting using surface vibrators, finishing with a power floater and trowel, followed by light brooming on the surface, levelling to the required slope and camber, and finishing with the specified texture. The scope also includes steel formwork with sturdy M.S. channel sections, curing, and making provisions for contraction / expansion joints as well as construction and longitudinal joints (10 mm wide 50 mm deep) in the transverse direction at 3.00 m C/C. These joints shall be sealed with approved-quality polysulphide sealant using a groove-cutting machine. Polypropylene fibre (length-1220mm @ 1 - 2kg/m) add as an admixture. The work involves providing and filling joints with approved joint filler and sealants, dewatering excess water using a vacuum pump, and covering transportation for machinery and labor charges, all as per the direction of the EIC. The cement concrete manufactured in an automatic batching plant (RMC plant), including transportation to the site in a transit mixer.(Specification as per BWF and IS standards.). | 116.500 | M3 |
| 4 | WOODEN FLOORING SYSTEM FOR BADMINTON COURT: The Surface Board: Kiln Seasoned Imported Teak Wood (Approved by Badminton World Federation and Certified Grade J EN 14904 As Per Badminton World Federation Standards) Surface board finished with 21 mm thick, 50 to 85 mm width and in random length in tongue and groove shape. The edges of the hoards will have a finger lock grove and the bottom side with air pass groove. The Under Frame: Made of S4S KD Canadian Pine Wood runners of 70 mm X 45 mm treated with anti-termite solution and fixed on the bottom side with 10 mm/19 mm thick EPDM cushioning pads by nails through the two wings at 350 mm c/c. The Installation: A 250 microns vapor barrier will be placed on the levelled IPS sub-floor before laying the under frame Approved by BWF Badminton World Federation and Certified Grade 1-EN 14904 as per Badminton World Federation Standards). The floor will be machine sanded with imported bona drum sander machine and finished with non-skid polyurethane lacquer polishing work. The badminton game line marking is to be applied before applying the final coat. (Specification as per BWF). | 920.000 | M2 |
| 5 | Providing and laying Fabric covered wrapped Acoustic wall panelling system at all heights on integral densified calcium silicate board of size 2440x1220x12mm having NRC Noise Reduction coefficient of 050 minimum as per is 82251987 Light reflectance of 85 minimum Noncombustible us per BS476 part4 fire performance as per BS476 part 6 amp7 humidity resistance of 100 thermal conductivity lt 0043 Wm K as per ASTM 5181991 including providing and fixing of frame work made of special sections power pressed from MS sheets and galvanized with zine coating of 120 gms sqm both side inclusive as per IS 277 and consisting of angle cleats of size 25 min wide x 16 mm thick with flanges of 27 mm and 37mm at 1200 mm centre to centre one flange fixed to the wall with dash fastener 125 mm Dia x 50mm long with 6mm Dia bolts the perimeter of cladding fixed to wallpartition with the help of rawl plugs at 450 man centre with 25mm long dry wall screws 230 mm interval including fixing of gypsum based to section with the help of dry wall screws of size 35 x 25 mm at 230 mm cc including jointing and finishing to a flush finish of tapered and square edges of the beard with recommended jointing compound jointing tapes as per design with infilling of glasswool acoustic synthetic wool of 50mm thickness and 1000 GSM density between the frame and duly covered with a top layer of compressed 15mm fabric Acoustic Panels of 120 kg density Per cubic mtr to achieve average NRC Noise Reduction Coefficient of 090 Edges in square type shape and size 1200x600x15 mm as per approved design and suitable clips Approved jute fabric to be installed on 15 mm Acoustic Panels in desired shape and size as per detailed drawing The rate quoted is inclusive of supplying fixing the 15mm fabric Acoustic Panels on 2440x1220x12 square Perforated Gypsum Acoustic Boards as per detailed drawings fixing the acoustic synthetic wool and fixing of the approved jute fabric panels etc complete as per drawings supplied by architect as directed of EIC | 867.000 | M2 |
Key Dates
| Publish Date | Thu 9th April, 2026 | Bid Submission Deadline | Thu 30th April, 2026 |
|---|---|
| Bid Opening | Refer Documents |
Documents
| Document Name | Action |
|---|---|
| Tender Notice |
FAQs
Sign up, download the bid documents, and submit as per the Key Dates. Need help? Talk to an expert.
Yes—JV MoU, compliance, share matrix, and end-to-end guidance. Start here.
We can help with PQC, technical compliance, and pricing strategies. Enquire now.